How-To

How to Apply Lace Glue Like a Pro

Getting a flawless lace install at home is easier than you think — you just need the right technique and the right products. This guide walks you through every step.

What You'll Need

For the best results, we recommend: Stay Stuck Lace Glue, On Guard Skin Shield, Stay Laid Melting Spray, a rat-tail comb, and a clean cloth. Having all your products ready before you start makes the process smoother.

Step 1: Prep Your Skin

Clean your hairline thoroughly with alcohol or a gentle cleanser. Remove any oils, moisturisers, or product buildup. Then apply On Guard Skin Shield to create a protective barrier.

This step is crucial — it prevents irritation AND helps the glue bond stronger and last longer.

Pro tip: Wait 60 seconds after applying On Guard before moving to the glue. Let it fully set.

Step 2: Apply the Glue

Using Stay Stuck Lace Glue, apply a thin, even layer along your hairline. The key word is thin — a thick application won't hold better, it'll just take longer to dry and may cause white residue.

Let the glue get tacky. This usually takes 30–60 seconds depending on the temperature and humidity. The glue should feel slightly sticky to the touch but not wet.

Step 3: Press and Secure the Lace

Carefully place your lace along the glue line and press firmly. Use a rat-tail comb or your fingers to smooth the lace into the adhesive, working from the centre outward.

Take your time here. A careful placement now means a better-looking result later.

Step 4: Melt It Down

Spray Stay Laid Melting Spray generously over the lace. This is the step that takes your install from good to undetectable. The spray melts the lace into the glue for a completely seamless finish.

Hold the spray about 6 inches from your hairline and apply in even passes. Let it dry naturally for the best results.

Pro tip: For an extra-invisible finish, wrap a silk scarf around your hairline for 10 minutes after melting. The compression helps the lace fuse even more seamlessly.

Step 5: Style and Go

Once everything is dry, style your wig as desired. Stay Stuck provides a hold that lasts days — even through sweat, humidity, and workouts.

Frequently Asked Questions

How long does the glue take to dry?

The glue becomes tacky in 30–60 seconds. Full cure time is about 5–10 minutes, but you can style as soon as the melting spray is dry.

Can I use a hair dryer to speed up drying?

Yes, a low-heat setting can help. Avoid high heat as it can affect the bond.

How do I avoid white residue?

Apply a thinner layer and let it get properly tacky before pressing the lace. White residue is almost always caused by too much glue or pressing too early.